Quantum bios – Foxconn Avenger User Manual
Page 47
40
3
Quantum BIOS
► CPU Feature / Memory Timing Config / All Voltage Control / OC Gear
Press
► Over Clock (O.C.) Phase Select
It allows you to select the over clock phase. Setting values: �O.C. Disabled��; �Manual O.C.��;
�Instant O.C.��.
► Instant OverClocking
This item is used for instant OverClocking, you may choose over clock instantly by 5%,
10%,15%.....etc.
***Ratio and Clock Setting***
► CPU Clock Ratio Unlock
This item is used to enable or disable the CPU Clock Ratio Unlock. If CPU ratio is unlock, this
item will be hidden.
► CPU Clock Ratio
This item is used to set the ratio of an unlocked CPU. Using different CPU, the setting values
are different.
► CPU Clock Ratio +0.5x
This item allows you to set the N/2 ratio of an unlocked CPU. If CPU do not support N/2 ratio,
an unlocked CPU. If CPU do not support N/2 ratio,
. If CPU do not support N/2 ratio,
this item will be hidden.
► Target CPU Core Speed
This item shows target CPU core speed.
► CPU Clock(FSB)
This item allows you to set CPU clock.
► CPU Clock vs Memory Speed
When "CPU Clock Ratio" is set to "Manual O.C", this item allows you to set the ratio between
CPU Clock and Memory Speed.
► System Memory Speed
This item shows the System Memory Speed.
► CPU Clock Skew Control
This item allows you to adjust the phase of the CPU clock.
Phoenix - AwardBIOS CMOS Setup Utility
Quantum BIOS
► CPU Feature
Press Enter
Item Help
► Memory Timing Config
Press Enter
► All Voltage Control
Press Enter
Menu Level ►
► OC Gear
Press Enter
Over Clock Phase Select
O.C. Disabled
Instant OverClocking
Default
������� Ratio and Clock Setting �������
CPU Clock Ratio Unlock
Disabled
x CPU Clock Ratio
CPU Max Ratio
CPU Clock Ratio + 0.5x
Enabled
CPU Clock Ratio + 0.5x
Enabled
Target CPU Core Speed
2804MH�
CPU Clock�FSB��
266
CPU Clock vs Memory Speed Auto
System Memory Speed
800MH�
CPU Clock Skew Control
0 ps
CPU Clock Amplitude Ctrl
800mv
PCI Express Clock
100
PCI Clock
33.6MH�
Spread Spectrum
Enabled
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F7:Optimized Defaults
Press Enter