Foxconn Avenger - Manual (Page 46)

39
3
PC Health status
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
► Current CPU/NB(North Bridge)/Memory Temperature
These items show the current CPU/NB temperature/Memory detected automatically by the
system.
► Smart CPU Fan Function
This item is used to set the Smart CPU Fan function. Configuration options:
�Full Speed��; �By Duty-Cycle��; �Smart FAN��.
► Smart CPU Fan Duty Cycle
It allows you to control the fan by the Duty-Cycle directly. You can input the value between 0
and 99.
► Smart CPU Fan Speed
This item shows the Smart CPU Fan speed detected automatically by the system.
► Smart System Fan Function
It allows you to set the smart System Fan function. Configuration options:
�Full Speed��; �By Duty-Cycle��; �Smart FAN��.
► Smart SYSFan Duty Cycle
This item is used to control the fan by the Duty-Cycle directly. You can input the value between
0 and 99.
► Current System Fan Speed
This item shows the Current System Fan speed detected automatically by the system.
► Current CPU/CPU VTT/DRAM/NB Chip Voltage
These items show the Current CPU/CPU VTT/DRAM/NB Voltage detected automatically by
the system.
► Current + 5/+ 12/+ 3.3/BAT Voltage
These items show the + 5.0V / + 12V / + 3.3V / BAT Voltage detected automatically by the
system.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Shutdown Temperature Disabled Item Help
Current CPU Temperature 62○C
Current NB Temperature 30○C Menu Level ►
Current Memory Temperature 35○C
Smart CPU Fan Function Smart FAN
Smart CPU Fan Duty Cycle 90%
Smart CPU Fan Speed 3254 RPM
Smart System Fan Function Smart FAN
Smart SYSFan Duty Cycle 90%
Current System Fan Speed 3254 RPM
Current CPU Voltage 1.30 V
Current CPU VTT Voltage 1.30 V
Current DRAM Voltage 1.56 V
Current NB Chip Voltage 1.27 V
Current +5 Voltage 5.03 V
Current +12 Voltage 11.79 V
Current +3.3 Voltage 3.24 V
Current BAT Voltage 3.07 V
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Disabled