Foxconn Avenger - Manual (Page 25)

18
2
speaker Connector : sPEAKER
The speaker connector is used to connect speaker of the
chassis.
serial ATA Connectors : sATA_1/2/3/4/5/6
The Serial ATA connector is used to connect with SATA
Hard Disk or CD devices which supporting this feature.
The current Serial ATA II interface allows up to 300MB/s
data transfer rate.
Fan Connectors : CPU_FAN, SYS_FAN,
fAN1/2/3
There are five fan headers on this motherboard. The fan
speed can be controlled and monitored in “PC Health
Status” section of the BIOS Setup. These fans can be
automatically turned off after the system enters S3, S4
and S5 sleeping states.
NC
SPKJ
EMPTY
SPEAKER
SPKJ
1
2
3
4
FAN_1/2/3 _1/2/3
GND
+12V
SENSE 1
SYS_FAN/CPU_FAN
GND
POWER
SENSE
CONTROL
1
SATA_1/2/3/4/5/6
GND
TX+
TX-
GND
RX-
RX+
GND
1