Foxconn Avenger - Manual (Page 52)

45
3
► All Precharge to Refresh All Precharge to Refresh
This item is used to set the all precharge to refresh delay(in clock cycles).
► Refresh Period Ratio
This item is used to set refresh period ratio.
► Refresh Period (tREF)
This item is used to set refresh period(in clock cycles).
► Command per Clock per Clock
This item is used to set the Command per clock for your memory (in clock cycles).
All Voltage Control
********Affect CPU MHz********
► CPU Voltage Multiplier
This item is used to set CPU Voltage Multiplier.
► CPU Voltage Setting
This item is used to set CPU Voltage.
► Target CPU/Current CPU/Default CPU Voltage
These items show the Target/Current/Default CPU Voltage. CPU Voltage. Voltage.
NOTE: The Target CPU Voltage equal to “CPU Voltage Multiplier” multiply “CPU Voltage
Setting”.
► CPU Vdroop Compensation
This item is enable or disable CPU vdroop compensation.
********Affect FSB MHz********
► CPU PLL Voltage Setting
This item is used to set CPU PLL Voltage. The default voltage is 1.500V.
► CPU VTT Voltage Setting
This item is used to set CPU VTT Voltage. The default voltage is 1.200V.
► CPU GTL Ref. 0/Ref. 1/Ref. 2/Ref. 3 Voltage
This item is used to adjust CPU GTL reference voltage.
► NB Voltage Setting / NB GTL Ref. Voltage NB GTL Ref. Voltage
Phoenix - AwardBIOS CMOS Setup Utility
All Voltage Control
�������� Affect CPU MH� �������� Item Help
CPU Voltage Multiplier x 1.000
CPU Voltage Setting 1.2500V Menu Level ►
Target CPU Voltage 1.2500V
Current CPU Voltage 1.2540V
Default CPU Voltage 1.2500V
CPU Vdroop Compensation Disabled
�������� Affect FSB MH� ��������
CPU PLL Voltage Setting 1.508861V
CPU VTT Voltage Setting 1.200V
CPU GTL Ref. 0 Voltage Default
CPU GTL Ref. 1 Voltage Default
CPU GTL Ref. 2 Voltage Default
CPU GTL Ref. 3 Voltage Default
NB Voltage Setting 1.250V
NB GTL Ref. Voltage Default
SB Voltage Setting 1.500V
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
x 1.000