Foxconn Avenger - Manual (Page 64)

57
4
3. Overclocking
Click "Overclocking" icon to enter the overclok setting menu. It allows you to adjust CPU
and PCIe clocks, and to change the voltages of CPU, chipset and memory. After you set the
values, click �Apply�� button to apply it.
4. Quantum Light
Click "Quantum Light" icon to open its menu. There are ten LEDs located on the mother- There are ten LEDs located on the mother-
board, and you can control the way the LEDs are lighting to show off. you can control the way the LEDs are lighting to show off.
4.1 Deafult Patterns
This interface supports four default patterns: Clockwise-Normal, CounterClockwise-Normal,
Twinkle-Normal and Twinkle-Slower. You can select a pattern, then click �Program�� button to start
the LED blinking.
Click these buttons to adjust
the CPU voltages
Apply the changes
Click these buttons to
adjust the CPU clock
Click these buttons
to adjust the PCIe
clock
Click these buttons to adjust
the Northbridge and Southbridge
voltage
Click these buttons
to adjust the memory
voltage
�Add Item�� button
�Program�� button �Simulation�� button
�SaveAs�� button
�Exit Window��
Add, delete or remove
pattern button
[Config] button
�SPEED�� button, there
are five options : Slow-
est, Slower, Normal,
Faster, and Fastest.
�Delete�� button