Foxconn Avenger - Manual (Page 53)

46
3
This item is used to set NB/ NB GTL reference voltage. NB GTL reference voltage.
► SB Voltage Setting
This item is used to set SB Voltage. The default voltage is 1.500V.
********Affect Memory MHz********
► DRAM Voltage Setting
This item is used to set DRAM voltage. The default voltage is 1.648V.
► DRAM Ref. Voltage
These items are used to set DRAM reference voltage.
oC Gear
*************OC Gear**************
► Current Storage Gear
We have more spaces in CMOS to allow you to store up to 8 sets of BIOS configuration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of eight storage area. Later, you can retrieve BIOS settings by
restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: �Not Use It��; �Storage Gear 1��; �Storage Gear 2��; �Storage Gear 3��; �Storage Gear 4��;
[Storage Gear 5]; [Storage Gear 6]; [Storage Gear 7]; [Storage Gear 8].
► Current Storage Gear Name
This item will be avaliable when Current Storage Gear is set to �Storage Gear 1��, �Storage
Gear 2��...�Storage Gear 8��, then you can select the overclock setting for the Current Storage
Gear. Setting values: �No Assign Gear Name��; �Still Tweaking��; �Max CPU��; �Max FSB��; �2d
Benching��; �3d Benching��; �24/7 OverClock��; �Tweaked Stock Speed��.
► Store/Restore/Clear My Setting
This item allows you to Store/Restore/Clear the BIOS settings. See the help string in “Item
Help” table for detail.
********Foxconn Function********
► Smart Boot Menu
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
��������������� OC Gear ��������������� Item Help
Current Storage Gear Not Use It
x Current Storage Gear Name No Assign Gear Name Menu Level ►
x Store My Setting Store
x Restore My Setting Restore Choose storage section
x Clear My Setting Clear 1 or 2 or 3 or 4 or 5
or 6 or 7 or 8 to
���������� Foxconn Function ���������� store your over clock
Smart Boot Menu Disabled setting. If you store
Smart Power LED Enabled your setting to
Hardware Jumper Selected BIOS ROM 2 Current Storage Gear
Software Item Selecting BIOS ROM 2 successfully, then the
Auto Detect PCI Clock Enabled Storage Gear will
turn to Green color
If you clear the
Current Storage Gear
successfully, then the
color will turn back
to normal.
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Not Use It