Dell DPND-523-EN12 - Manual (Page 76)

76 | Appliance Management
Network Discovery
Assign a system name, contact, and location
„
“System name” is the name of the network or part of the network that
Network Discovery is currently managing. The system name is displayed in
the Toolbar banner.
„
“System contact” is the Network Discovery Administrator.
„
“System location” is the physical location of the Peregrine appliance.
These are standard SNMP entries; assign them according to your corporate
policy.
To assign a system name, contact and location
1 Click Administration > Appliance management > Appliance system
variables.
2 Enter the system name.
The system name can be a maximum of 250 characters long (including
spaces)
3 Enter the system contact.
4 Enter the system location.
5 Click Change.
Note: The new system name does not appear in Toolbar banner until you close
and reopen the Toolbar.