Dell DPND-523-EN12 - Manual (Page 142)

142 | Backup and Restore
Network Discovery
Ethernet port 2 on the HP DL360/DL380:
Step 4: Check the connection between the two appliances
To check the connection between the two appliances
1 On the new appliance, click Administration > Backup and restore > Test
external backup and restore.
2 Select “appliance.”
3 Click Test.
Step 5: Remove the old appliance from the network
„
Disconnect the network cable from the old appliance.
Step 6: Connect the new appliance to the network
„
Follow the procedure Connect the appliance to the network on page 60 in
Chapter 5, Install and Start Network Discovery .
Step 7: Log in to the new appliance
„
Enter the URL for your appliance and log in with the following info:
User Name: admin
Password: password
Use Ethernet port 2
for the crossover cable