Formax FD 2094 - Manual (Page 36)

32
TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE REMEDY
Machine not running Is the power on?
Machine not plugged in
Safety covers are raised/open
No power even with machine
turned on, plugged in and wall
power is on?
Make sure the power to the folder,
sealer, conveyor and burster are in the
on position. Check to make sure the
wall outlet has power
Make sure all the plugs are plugged in
properly
Make sure the safety covers for the
folder and sealer are lowered.
Call Service
Double feeding forms Feeder is not set properly
Paper is stuck together
Using paper other than
specifi ed
See Gap Adjustment, pg 10.
Separate sheets from each other.
Paper other than specifi ed may cause
mechanical trouble.
Sealer jams Double feeding Turn power off, insert jam clearing bar
into sealer roller and turn
counter-clockwise until jam is cleared.
Folder Jams Double feeding
Paper stuck in fold plate
Turn power off, turn hand wheel counter
clockwise and clear jam.
Turn power off, remove fold plate and
clear paper.
Metal rollers dirty Toner is on metal rollers of
sealer
Unplug machine and clean with
approved cleaner.
Paper fold gets out of
place
Paper stops have moved
Folding roller is dirty
Rotate the fi ne adjustment knobs to
correct movement, pg 10.
Clean with approved cleaner.
Paper jam occurs often Folding roller is dirty
Is inside of machine dirty?
Are conveyor nip rollers in
proper positions?
Is paper curled?
If paper jamming continues.
Clean with approved cleaner.
Clean inside of machine.
Set rollers to proper position.
Let paper sit curl side down with weight
on top to eliminate curl.
Call for service.