Formax FD 2094 - Manual (Page 10)

6
FOLD PLATE INSTALLATION
WARNING: Unplug the AC power cord when installing
or removing fold plates.
The fold plates are interchangeable. Each fold plate
has an open end which faces toward the fold rolls.
1. To install the fold plates, pivot the fold plate hold-
downs (Fig. 7) out of the way and slide the fold plate
in position so the slots in the leading edge of the fold
plate engage the two locating pins in the side frames.
The center notches should seat on the second set of
locating pins.
2. Pivot the fold plate hold-downs back into position to
secure the fold plates.
3. Turn the hand wheel (Fig. 10) to be sure that the
fold plates are properly installed and not rubbing on
the fold rolls.
4. Plug the fold plate connectors into the side frame.
(Fig. 8a & 8b)
NOTE: Do not operate machine without fold plates in
place.
Fold Plate Locks
Fold plate
hold down
Fig. 7
Upper Fold Plate
Bottom Fold Plate
Fold plate connectors
Fig. 8b
Fig. 8a