Formax FD 2094 - Manual (Page 12)

TRANSFER TABLE ASSEMBLY INSTALLATION - 2084
1. Install the transfer table for the 2084. Insert the
table between the folder side frames (Fig. 13) and
set the notches on to the locating pins (Fig. 9a).
2. Align the outfeed of the burster with the transfer
table and push the burster forward until the mounting
holes of the transfer table and the burster line up.
Slide mounting pins into holes to lock the table in
place (Fig. 14).
Fig. 13
Locating mounting pins Fig. 14
3. Plug burster power cable & interlock cable into
folder (Fig. 15). Remove lower fold plate to access
the receptacles.
Interlock cord Power cord Fig. 15
Fig. 16
4. Place ball deck onto the burster transfer table (Fig.
16).
8