Formax FD 2092 - Manual (Page 22)

TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE REMEDY
Machine not running Is the power on?
Is the machine plugged in?
Are the safety covers lowered?
No power even with machine
turned on, plugged in and wall
power is on?
Make sure the power to the folder, sealer
and conveyor are in the on position.
Check to make sure the wall outlet has
power
Make sure all the plugs are plugged in
properly
Make sure the safety covers for the
folder and sealer are lowered.
Call Service
Double feeding forms Is the feeder set properly?
Is paper stuck together?
Using paper other than
specified?
See pages 7,8 & 9.
Separate paper from each other.
Paper other than specified may cause
mechanical trouble.
Sealer jams Double feeding? Turn power off, insert jam clearing bar
into sealer roller and turn back counter
clockwise until jam is cleared.
Folder Jams Double feeding?
Paper stuck in fold plate?
Turn power off, turn hand wheel counter
clockwise and clear jam.
Turn power off, remove fold plate and
clear paper.
Metal rollers dirty Toner is on metal rollers of
sealer?
Unplug machine and clean with
approved cleaner.
Paper fold gets out of
place
Paper stops have moved?
Is folding roller dirty?
Rotate the fine adjustment knobs to
correct movement.
Clean with approved cleaner.
Paper jam occurs often Is folding roller dirty?
Is inside of machine dirty?
Are conveyor nip rollers in
proper positions?
Is paper curled?
If paper jamming continues.
Clean with approved cleaner.
Clean inside of machine.
Set rollers to proper position.
Let paper sit curl side down with weight
on top to eliminate curl.
Call for service.
20