Formax FD 2092 - Manual (Page 21)

DAILY MAINTENANCE
General Cleaning
Take a few minutes at the end of each day to wipe off accumulations of paper dust. Cover your machine when
not in use. These practices will keep your machine clean and in tip-top operating condition.
Fold Roller Cleaning
Keep fold rollers clean. Most folding problems are the result of material accumulations on the fold rollers.
Although designed to minimize accumulations, over a period of time, ink and dust buildup will prevent the
rollers from gripping the stock evenly. Rollers must be cleaned on a regular basis to maintain optimum folding
performance.
Disconnect the power, remove the fold plates and clean rollers with Formax approved cleaner designed for the
type of rollers your machine is equipped with. Turn the rollers with the hand wheel never attempt to clean rollers
with the machine running.
Check rollers periodically for wear. During normal use fold rollers will gradually wear. Worn rollers will be evident
by increased setup times, increased spoilage, inaccurate folding and inability to control the sheet. If one or more
of these conditions are noted, contact your authorized Formax folder dealer to inquire about inspection and/or
possible roller replacement.
Sealer Roller Cleaning
Keep sealer rollers clean. Sealing problems may occur if printer toner builds up on the steel rollers.
Disconnect the power, lift the sealer safety cover and wipe the rollers down with Formax approved lint free cloth
and roller cleaner.
19