Formax FD 2092 - Manual (Page 20)

Fault Detectors Safety Covers
The burster (2082), folder and sealer are equipped
with plexi safety covers (Fig. 35a, 35b & 35c).
The 2092 and 2082 will not run unless plexi-safety
covers are in the lowered position.
Folder Safety Cover
Fig 35b
Sealer Safety Cover
Fig 35c
Burster Safety Cover
Fig 35a
Folder - The folder is equipped with a delivery area
jam detector. This device senses jams at the eight
ball transfer deck and immediately stops the burster,
folder, and sealer until the jam is removed and the
machine is restarted. The jam detector is mounted
on the center of the tie bar and looks similar to a third
stacker spring, it may be reformed for best operation
(Fig. 37).
Sealer - A photo-eye sensor is located on the Eight
ball transfer deck before entering the sealer unit.
This device senses jams and immediately stops
the sealer, burstor (2082) and folder until the jam is
removed and the machine is restarted (Fig. 37).
Burster (2082) - The burster is equipped with on
outfeed jam detector grill. This device senses jams
between the burster and the transfer table and stops
the burstor until the jam is removed and the machine
is restarted (Fig 36).
Fig 36
Burster Jam Grill
Folder Jam Detector Sealer Photo-eye
18