Fluke Biomedical IDA-5 - Manual (Page 22)

IDA-5
Users Manual
12
Select Device Information to record data for the test. The Device Information
screen discussed in Table 5 is shown. Initially, only the fields in the top-half of the
screen can be seen. Record the applicable data in the fields and push ENTER to
accept the value and move to the subsequent field.
Table 5. Device Information Fields
D e v i c e I n f o r m a t i o n C h a n n e l 1
Control No
Operator
Flow Rate Tolerance %
Volume Duration
When Volume reached Notify Operator
Manufacturer
Device Type
Serial Num.
Location
Comments
P r e s s E N T E R f o r n e x t f i e l d
P r e s s E S C f o r p r e v i o u s f i e l d
gir07.eps
Field Description
Control Number
An alpha-numeric code to identify the instrument you will test. This field cannot be
empty.
Operator
The name, initials, or identification code of the person who will do the test. This field
cannot be empty.
Flow Rate The set flow rate of the infusion device.
Tolerance
Sets error bars on the flow graph. The error bars can be the permitted flow
performance tolerance of the infusion device that you test. This will default to the
value set on the Default Test Preferences screen (see “Utilities”), but can be
overridden.
Volume
The amount intended to be supplied. This volume will be used by the test-stop feature
(if enabled).
Duration
The intended length of the test. This time will be used by the test-stop feature (if
enabled).
When
Sets the condition the Product will use to tell you that the test is complete. This will
default to the value set on the Default Test Preferences screen (see Utilities), but can
be overridden.
Reached
Sets what occurs when the recorded test-stop condition is met. It will default to the
value set on the Default Test Preferences screen (see Utilities), but can be
overridden.