Fluke Biomedical VT Mobile - Manual (Page 31)

Using the VT MOBILE
Screens
3
3-7
Flow Screen
Press N to access the Flow Waveform Screen, which displays the reading and
waveform for flow in the flow/low-pressure port of the Analyzer. The Analyzer
automatically detects whether the High- or Low-Flow Sensor is connected. A sample
flow waveform screen appears below:
ede32s.bmp
Press G to change the units of measure for the flow screen. Possible units of measure
for this screen include:
• LPM: Liters per minute
• CFM: Cubic feet per minute
• LPS: Liters per second
• mL/min: Milliliters per minute
• mL/sec: Milliliters per second
Press F to change the scale on the plot of data to a more appropriate window of
values.
Note
Rescale uses the current Min/Max values to determine plot limits.
Pressure Screen
Press L as required to access the Pressure Screen, which displays the reading and
waveform for the pressure signal from the high-pressure or low-pressure/flow port. In
order, sample high-pressure and low-pressure screens appear below:
ede33s.bmp
ede34s.bmp