Flowserve MX Electronic Actuator - Manual (Page 4)

Limitorque MX Electronic Actuator FCD LMENIM2306-06 – 10/13
4
4.12.3 Network Address 56
4.12.4 Analog Scale 56
4.12.5 ESD Action 56
4.12.6 Proportional Band 57
4.12.7 Deadband 57
4.12.8 Comm Loss Delay 57
4.12.9 Comm Loss Action 57
4.13 HART Option 58
4.13.1 Status 58
4.13.2 Multi-drop 58
4.13.3 Input Action 59
4.13.4 Fail Position 59
4.13.5 Polling Address 59
4.13.6 Save Settings 59
4.13.7 Change Prop/Deadband 59
4.13.8 ESD Action 59
4.13.9 Change clock 60
4.14 Status and Alarm Contacts 60
4.14.1 Status and Alarm Contact Default Settings 60
4.14.2 Status Function 61
4.14.3 Contact 61
4.14.4 Valve Position 62
4.15 Two-speed Timer (Optional) 62
4.15.1 Status 62
4.15.2 Start Position 62
4.15.3 Stop Position 62
4.15.4 Pulse Time – ON 62
4.15.5 Pulse Time – OFF 63
4.16 Analog Output 63
4.16.1 APT Polarity Option 66
4.16.2 ATT Polarity Option 66
4.17 Remote Mode 67
4.17.1 Local Control 67
4.17.2 LED Customization 68
4.18 ESD (Emergency Shutdown) Overrides 68
4.18.1 ESD Override 68
4.18.2 Inhibit 69
4.18.3 Local Command 69
4.18.4 Stop 69
4.18.5 Jammed Valve* 69
4.18.6 Lost Phase* 69
4.18.7 Overtorque* 70
4.18.8 Motor Thermostat 70
4.18.9 Oil Over Temperature 70
4.18.10 Two-speed Timer 70
4.18.11 Network ESD 70
4.18.12 Torque Switch Timer 71
4.19 Inputs 71
4.19.1 Input Standard Remote Control 71
4.19.2 Status 72