Flowserve Byron Jackson Type M - Manual (Page 7)

® Byron Jackson Double Mechanical Seal Submersible Pumping Unit • 1042.293/9 • June 04
Page 7 of 68
1.6.2 General safety instructions
NOTE Always follow
•
legal regulations
•
plant regulations
•
these user instructions
concerning safety.
Absolutely heed all information placed directly on
the pumping unit and given in Chapter 12.2 "Data
sheet", as for example
•
rotation arrow
•
labeling of connections
•
rating plate.
Danger of injury by
•
knocking against parts, tools or
equipment
•
jamming fingers or hands in or
between parts, tools or equip-
ment
•
dropping parts, tools or equip-
ment on parts of the body.
1.6.3 Personnel qualification, training and
protective clothing
Personnel qualification and training
All personnel involved in the operation, installation,
inspection and maintenance of the pumping unit
must be qualified and authorized to carry out the
work involved.
If the personnel in question do not already possess
the necessary knowledge and skill, appropriate
training and instruction must be provided. If re-
quired, the operator may commission the manufac-
turer / supplier to provide applicable training.
Always co-ordinate repair activity with operations
and health and safety personnel, and follow all
plant safety requirements and applicable safety
and health laws and regulations.
DANGER
All work on the electrical system
may only be performed by qualified
electricians!
All work on the hydraulic connec-
tions may only be performed by
qualified fitters.
Protective clothing
During transport, installation and removal of the
pumping unit, all personnel must wear
•
helmet
•
safety boots
•
protective gloves
During operation of the pumping unit at the control
center, all personnel must wear
•
protective gloves
NOTE Also follow
•
legal regulations
•
plant regulations
concerning protective clothing.
1.6.4 Authorized and prohibited use
The safe operation of the pumping unit can only be
guaranteed if it is operated as authorized.
The only authorized utilization of the pumping unit
is to pump water from a well. The pumping unit is
to be operated submerged in water.
NOTE Not all components or sub-
assemblies of a pumping unit are
necessarily supplied by Flowserve
or part of this delivery.
These user instructions apply only
to the components or sub-
assemblies supplied by Flowserve
in this delivery, see Chapter 12.1
"Scope of delivery".
By not heeding this user instructions, product liabil-
ity is rendered void.