Flowserve WDX User Manual
Pump division type: wdx centrifugal pumps
Table of contents
Document Outline
- 1 INTRODUCTION AND SAFETY
- 1.1 General
- 1.2 CE marking and approvals
- 1.3 Disclaimer
- 1.4 Copyright
- 1.5 Duty conditions
- 1.6 Safety
- 1.7 Safety labels summary
- 1.8 Specific machine performance
- 1.9 Noise level
- 2 TRANSPORT AND STORAGE
- 2.1 Consignment receipt and unpacking
- 2.2 Handling
- 2.3 Lifting
- 2.4 Storage
- 2.5 Recycling and end of product life
- 3 PUMP DESCRIPTION
- 3.1 Configurations
- 3.2 Nomenclature
- 3.3 Design of major parts
- 3.4 Materials of construction
- 3.5 Performance and operating limits
- 3.6 Coverage charts
- 4 INSTALLATION
- 4.1 Location
- 4.2 Cleaning prior to installation
- 4.3 Foundation
- 4.4 Grouting
- 4.5 Initial alignment
- 4.6 Piping
- 4.7 Final shaft alignment check
- 4.8 Electrical connections
- 4.9 Protection systems
- 5 COMMISSIONING, START-UP, OPERATION AND SHUTDOWN
- 5.1 Pre-commissioning procedure
- 5.2 Pump lubricants
- 5.3 Direction of rotation
- 5.4 Guarding
- 5.5 Priming and auxiliary supplies
- 5.6 Starting the pump
- 5.7 Running the pump
- 5.8 Stopping and shutdown
- 5.9 Hydraulic, mechanical and electrical duty
- 5.10 Pumps for Food Use or Potable Water
- 6 MAINTENANCE
- 6.1 General
- 6.2 Maintenance schedule
- 6.3 Spare parts
- 6.4 Recommended spares and consumable items
- 6.5 Tools required
- 6.6 Fastener torques
- 6.7 Renewal clearances
- 6.8 Disassembly
- 6.9 Inspection of components
- 6.10 Assembly
- 7 FAULTS; CAUSES AND REMEDIES
- 8 PARTS LISTS AND DRAWINGS
- 8.1 Sectional drawings, WDXR grease lubricated uncooled
- 8.2 Sectional drawings, variants
- 8.3 Sectional drawings, other details
- 8.4 Sectional drawings part list
- 8.5 General arrangement drawing
- 9 CERTIFICATION
- 10 OTHER RELEVANT DOCUMENTATION AND MANUALS
- 10.1 Supplementary User Instructions
- 10.2 Change notes
- 10.3 Additional sources of information