Flowserve Byron Jackson Type M - Manual (Page 21)

® Byron Jackson Double Mechanical Seal Submersible Pumping Unit • 1042.293/9 • June 04
Page 21 of 68
Figure 5 Motor U-plate
Nominal
motor
size Dimensions in cm
(inches)
A B C D E
8" 38.10
(15)
0.95 +
0.32
(0.375 +
0.125)
25.40
(10) 25.40
(10) 14.61 +
0.32
(5.750 +
0.125)
10" 40.64
(16)
0.95 +
0.32
(0.375 +
0.125)
30.48
(12) 25.40
(10) 18.10 +
0.32
(7.125 +
0.125)
12" 45.72
(18)
1.27 +
0.32
(0.500 +
0.125)
35.56
(14) 25.40
(10) 19.05 +
0.32
(7.500 +
0.125)
14" 50.80
(20)
1.27 +
0.32
(0.500 +
0.125)
35.56
(14) 25.40
(10) 24.77 +
0.32
(9.750 +
0.125)
21" 91.44
(36)
1.27 +
0.32
(0.500 +
0.125)
73.66
(29) 53.34
(21) 42.57 +
0.32
(16.760
+ 0.125)
Table 4 Motor U-plate chart
4.2.3 Personnel required
Flowserve recommends that 2 persons plus 1
crane operator perform the installation or uninstal-
lation procedure.
4.3 Hydraulic connection
Exemplary construction of a water supply system is
depicted in Figure 6, Page 22. As this shows a ba-
sic arrangement, the actual layout must be suited
to local and technical conditions.
DANGER
All work on the hydraulic connec-
tion may only be done by qualified
fitters.