ETA Gratus Maxipasta - Manual (Page 44)

– Before removing the extra attachment from the drive unit, allow the rotating parts to stop
completely.
– Do not fill the container with water or other liquid to maximum. When in operation, the
water could overflow and get into the appliance.
– Handle the accessories very carefully, they are very sharp.
– Do not process foods with a temperature over approx. 80 °C (176 °F).
– If the processed foods start to stick to the accessories (e.g. on the blades or graters),
turn off the appliance and carefully clean the accessories (e.g. with a spatula).
– Make sure that the power cord does not come into contact with the rotating part of the
appliance.
– The power cord must not be damaged by sharp or hot objects, by an open flame and
it must not be submerged under water.
– Never place it on hot surfaces and do not leave it hanging over the edge of a table
or a work bench. If the cord is brushed against or pulled by for example children the
appliance may tip over or be pulled down and lead to serious injuries!
– If the use of an extension cord is necessary, then it must not be damaged and must meet
the valid norms in force.
– Only use the appliance with original accessories from the manufacturer.
– Use this appliance only for the purpose for which it was designed as specifi ed in this
user‘s manual. Never use the appliance for any other purpose.
– The manufacturer takes no responsibility for damages and injuries caused by the
incorrect use of supplementary machines and accessories (e.g. ruining of foods, injury,
cuts) and takes no responsibility arising from the warranty on the appliance in the case
that the above safety notices were not followed.
II. DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A – Food processor (pic 1)
A1 – Release lever for the multi-function head A7 – Multi-function head
A2 – Speed dial A8 – Button for opening the cover of
the blender
A3 – Mount for the attachments A9 – Cover
A4 – Mount for meat mincer and cutter A10 – Mount for the blender
A5 – Release button A11 – Power cord
A6 – Removable cover
B1 – Stainless steel bowl C1 – Beater
B2 – Bowl cover C2 – Whisk
B3 – Filling opening cover C3 – Kneading hook
D – Meat mincer (pic 2)
D1 – Conveyor screw D9 – Separator
D2 – Cutting blade D10 – Tube for making sausages
D3 – Interchangeable plate for fine mincing D11 – Mould
D4 – Interchangeable plate for mid mincing D12 – Cone
D5 – Interchangeable plate for coarse mincing D13 – Pusher
D6 – Nut D14 – Filling funnel
D7 – Mould holder D15 – Cog wheel
D8 – Mould
44
GB
/ 90