Drake EEG-QIP Enterprise Edge Guide with QAM and IP Input / CHIC Software - Manual (Page 18)

18 937.746.4556 | www.rldrake.com
Event Log Screen
The “Event Log” screen is a “read and write” screen where the following parameters can be displayed or configured.
Clear Log: allows to clear the records generated during unit’s boot-up process and operation afterward. The
records are cleared if the unit loses power.
Lines to Display: allows the user to select the number of lines to be displayed. The unit supports up to 4 MB of
data or approximately 65,000 lines. The range is 1 to 65,535.
Save Number of Displayed Lines: allows the user to save the error log on the screen. Please note that the error
log would be saved only on the screen and not on any database. 1
2
3
1
2
3