Drake EEG-QIP Enterprise Edge Guide with QAM and IP Input / CHIC Software - Manual (Page 15)

15 937.746.4556 | www.rldrake.com
Output Screen
The “Main > Output” screen is a “read and write” screen to assign the TS to desired IP and QAM outputs:
TS Mapping: indicates the program assigned to the TS. The program information includes the PMT PID, Program
number, Short Name, Major-minor channel number.
Bitrates: indicates the assigned transport stream bitrate and the TS Bitrate
IP: select the IP address, and the port number to which TS is assigned
QAM: select the QAM RF channel number of the QAM output
1 2 3 4
1
2
3
4
NOTE: Be sure to Save entries.