Drake MPM860AG Agile Processor Module User Manual

8 warranty

DRAKE RMM12 - 12 SLOT RACK MOUNT CHASSIS

DRAKE PSM121 - POWER SUPPLY

MPM860AG

MPM860AG Channel 3 or 4 Agile Processor 1

BUILT-IN POWER SUPPLY

RMM4A - 4 SLOT RACK MOUNT CHASSIS (WITH BUILT-IN POWER)

The MPM860AG mini processing module is a

member of the R.L. Drake 19” Mini-Rack Series,

a professional quality modular headend system

designed to optimize rack space. An assortment

of up to twelve (12) modular units, such as the

VMM Series of ﬁxed channel and agile channel

modulators, the MPM860AG, or compatible

audio/video products can be racked alongside a

single power supply (Drake model PSM121 - 12

Unit Power Supply) in the Drake model RMM12

(12 Slot Rack Mount Chassis). The Drake RMM4A

Rack Mount Chassis (with Built-In Power Supply)

accepts up to four (4) modular units.

The R.L. Drake MPM860AG is a miniature analog

double conversion heterodyne channel processor

designed speciﬁcally to accept a Channel 3 or

Channel 4 RF input from a typical consumer

grade CH3/4 NTSC modulator. The input signal

can be either double sideband as typical for such

a modulator, or vestigial sideband modulated.

The MPM860AG contains SAW ﬁltering to insure

that the output of the MPM860AG is a vestigial

sideband output for use in a 6 MHz-wide channel

environment. Adjacent output channels are

allowed.

The frequency agile MPM860AG allows front panel

push-wheel switch selection of standard CATV

channels 2 though 135, or VHF/UHF TV channels 2

through 69. Aeronautical channels are oﬀset per

FCC requirements. Internal jumpers permit set-up

for HRC or IRC CATV channel plans as well.

The heterodyne conversion system, in conjunction

with the use of a SAW ﬁlter, ensures optimum

vestigial selectivity for adjacent channel headends.

Note that the output of the MPM860AG is related

to the input signal’s stability and level. A nominal

input level of +10 dBmV ± 3 dB is desired at CH3 or

CH4. The front panel GAIN control on the

MPM860AG can then be adjusted to obtain a +45

dBmV output level. The MPM860AG is linear and if

the input level is changed, the MPM860AG’s output

level will follow.

R.L. DRAKE HOLDINGS, LLC

9900 Springboro Pike

Miamisburg, OH 45342 U.S.A.

CUSTOMER SERVICE AND PARTS:

PH - (937) 746 - 6990

FX - (937) 806 - 1576

[email protected]

SALES:

PH - (937) 746 - 4556

FX - (937) 806 - 1510

[email protected]

http://rldrake.com

® is a registered trademark of R.L. Drake Holdings, LLC

8 Warranty

THREE YEAR LIMITED WARRANTY
R.L. DRAKE HOLDINGS, LLC warrants to the original purchaser that this product shall be free from defects in

material or workmanship for three (3) years from the date of original purchase.

During the warranty period, R.L. DRAKE HOLDINGS, LLC, or an authorized Drake service facility, will provide,

free of charge, both parts and labor necessary to correct defects in material and workmanship. At its sole

discretion, R.L. DRAKE HOLDINGS, LLC may replace a defective unit.
To obtain such a warranty service, the original purchaser must:

1. Retain invoice or original proof of purchase to establish the start of the warranty period.

2. Notify R.L. DRAKE HOLDINGS, LLC or the nearest authorized service facility, as soon as

possible after discovery of a possible defect, of:

a) the model and serial number,

b) the identity of the seller and the approximate date of purchase; and

c) A detailed description of the problem, including details on the electrical

connection to associated equipment and the list of such equipment.

3. Deliver the product to R.L. DRAKE HOLDINGS, LLC or the nearest authorized service facility, or

ship the same in its original container or equivalent, fully insured and shipping charges

prepaid.

Correct maintenance, repair, and use are important to obtain proper performance from this product.

Therefore, carefully read this Instruction Manual. This warranty does not apply to any defect that R.L.

DRAKE HOLDINGS, LLC determines is due to:

1. Improper maintenance or repair, including the installation of parts or accessories that do not

conform to the quality and speciﬁcations of the original parts.

2. Misuse, abuse, neglect or improper installation.

3. Accidental or intentional damage.

All implied warranties, if any, including warranties of merchantability and ﬁtness for a particular purpose,

terminate three (3) years from the date of the original purchase.
The foregoing constitutes R.L. DRAKE HOLDINGS, LLC's entire obligation with respect to this product, and

the original purchaser shall have no other remedy and no claim for incidental or consequential damages,

losses or expenses. Some states do not allow limitations on how long an implied warranty lasts or do not

allow the exclusions or limitation of incidental or consequential damages, so the above limitation and

exclusion may not apply to you.
This warranty gives you speciﬁc legal rights and you may also have other rights which vary from state to

state. This warranty shall be construed under the laws of State of New Jersey.
For Service, contact:

MPM860AG Channel 3 or 4 Agile Processor