Drake PS8(MIPS) Power Supply - Manual

TM
PS8 Power Supply 1
GENERAL
Power Requirements: ----------------- 100 VAC to 240 VAC
(and -10%/+10% of end limits)
Frequency: ---------------------------------------------- 50/60 Hz
AC Input Power: ------------------------------------- 80 WATTS
Operating Temperature Range: ---------------- 0 to +50 0 C
Internally Mounted (50 mm) Axial Fan
(12 VDC @ 140 mA): ---------------------- 12 CFM (ft 3 /min.)
Output Voltages: ------- +5 VDC @ 4.75 Amps maximum;
+12 VDC @ 3 Amps maximum
MECHANICAL
Dimensions: (WxHxD): ----------- 4.2 in. x 3.5 in. x 9.4 in.
(10.7 cm x 8.9 cm x 23.9 cm)
Weight: --------------------------------------------2.6 lbs. (1.2 Kg)
CONNECTORS
AC Input: -------------------------------------------------------- IEC
DC Output: ------------------------------------Mini-Fit, JR. x 8
Fuse (Internal, AC input): 2A, 250 V
SLO-BLO
5 x 20 mm
(Power supply assembly employs short circuit and
over-voltage protection).
ACCESSORY SUPPLIED
AC Power Cord: -------------------------------- 6 Ft., IEC, USA
PS8 Rear Panel Connections
Both the AC input receptacle and DC output connector
are located on the rear panel of the power supply
module.
1. AC Input -
The power supply accepts standard 100
to 240 VAC, 50/60 Hz inputs (and -10%/+10% of that
voltage range).
2. DC Output -
The polarized Mini-Fit, JR. connector
provides 8 sets of +12 VDC, +5 VDC, and Ground
connection cables for the compatible digital rack units.
TM is a trademark of the R.L. Drake Company
© Copyright 2001 R.L. Drake Co. P/N: 3852376B-5-2001
Printed in the U.S.A.
POWER SUPPLY
PS8
100-240 V
~
50/60 Hz
80 WATTS
DC OUTPUT RATING -
TOTAL OF ALL OUTPUTS: +5 V: 4.75 A MAX.
+12 V: 3.0 A MAX.
DC OUTPUTS X 8
12 V GND 5 V
R.L. DRAKE COMPANY
710 Pleasant Valley Drive
Springboro, OHIO 45066 U.S.A.
CUSTOMER SERVICE AND PARTS TELEPHONE:
+1 (937) 746-6990
TELEFAX:
+1 (937) 743-4510
WORLD WIDE WEB SITE: http://www.rldrake.com
®