Drake DNP100 Network Media Player - Manual (Page 36)

THE DNP100 DRAKE NETWORK PLAYER
DNP100 SPECIFICATIONS
Video Output
Component: 480p, 720p, 1080i, 1080p.
HDMI: 480p, 720p, 1080i, 1080p.
Composite: 480i.
Output: VGA & HDMI.
Audio Output
L/R Stereo: L/R RCA.
Digital: Optical Toslink.
HDMI-embedded Audio.
Control I/O
RS-232 Commercial Monitor Control.
IR Extender (on front panel).
Network Connection
LAN: 10/100/1000 Base-T.
WiFi: 802.11 b/g (optional)
Video Format Support
MPEG2: MP@HL (35 Mbps max HD).
MPEG4: Part 2 (20 Mbps max HD).
Part 10 H.264 (15 Mbps max HD).
Composite: 480i.
WM9/VC-1: 20 Mbps max.
Graphics Format
JPEG: On media player, (recommended resolution is 1920x1080).
Browser Support: HTML, BMP, TIFF, GIF, Javascript.
Bandwidth
Broadband: DSL, Cable, T1 (bandwidth requirements may vary based on content
needs).
TCP/IP Address
LAN: Any fi xed IP address for each player.
Required Ports for SNMP API
Player port is fi xed at 161.
Source port 161, Player IP, Destination Port 161.
Network Protocol Support
Internet: IP, TCP, UDP, ICMP, ARP, DHCP, HTTP, FTP, IGMP, RTP, SNMP.
Power
Input Voltage: 100 - 240 VAC.
Power Dissipation: 7 Watts.
Environment
Operating Temperature: 0 to 40° C.
Operating Humidity: 80% max, relative humidity, non-condensing.
General
Dimensions: 9.6” X 1.1” X 4.3”
Unit Weight: 2.0 lbs.
*Specifi cations are subject to change without notifi cation or prior warning.*
36