DR Power Tow-Behind 9.00 Commercial (May 2006 - July 2010) - Manual (Page 36)

32 DR
®
COMMERCIAL LEAF and LAWN VACUUM
USE COMMON SENSE WHEN USING THE MACHINE. LEARN TO RECOGNIZE THE CHANGE IN SOUNDS
WHEN OVERLOADED. STOP THE ENGINE IMMEDIATELY IF THE MACHINE BECOMES JAMMED TO
PREVENT DAMAGE TO THE DRIVE SYSTEM.
Tips:
•
It is best to trim off any side twigs from the main branch being chipped (Figure 33).
•
Green branches process quicker and easier than dry branches and soft wood is easier than hardwood.
• Use caution with small diameter green saplings and branches. Chip these grouped or bundled
together to provide support for each other (Figure 34).
•
Make sure the Chipper finishes chipping material in the Hopper before shutting the engine off.
Figure 33
Figure 34
Bundled
Saplings