DR Power Tow-Behind 9.00 Commercial (May 2006 - July 2010) - Manual (Page 25)

CALL TOLL-FREE 1-800-DR-OWNER 21
Lawn Deck Adapter Installation
The following procedure includes the steps necessary for connecting the DR LEAF and LAWN VACUUM
Blower Inlet Hose to your Lawn Tractor.
Tools Needed:
•
1/2" Wrench or Socket
•
Drill with 3/8" Bit
•
Saw
1. Install your Lawn Deck Adapter (available from the manufacturer of your lawn tractor) on your Lawn
Tractor.
NOTE: Optional Accessories:
Due the variety of Lawn Tractors, the Hose Kits supplied may not fit all tractors. Our Technical Service
Dept. can help you adapt to your machine.
-
A Universal Deck Adapter is available for you to fit to your machine if the tractor manufacturer’s
Lawn Deck Adapter is not available.
- A Lawn Deck Adapter Extension is available to attach to a small deck adapter and support the
Vacuum Hose.
2. Mark the distance of approximately 23" from the ground to the top surface of your Lawn Deck Adapter
Exit Tube (Figure 20).
3. Remove the Lawn Deck Adapter from your Lawn Tractor and using a saw, cut the Exit Tube of the Lawn
Deck Adapter at 90° (Figure 20).
Figure 20
Exit Tube Cut-Off Point
Exit Tube
23"