DNF Controls USP-S - Manual (Page 16)

Page 16 of 27
Local /
Remote
Execute Action on Local resource
Execute Action on Remote Device
Local: GPO Do Nothing
Turn GPO ON
Turn GPO OFF
Serial Transmit Action
Transmit selected Serial Action command once. If command contains
WAIT (%WT), then transmit all characters prior to %WT, wait for the time
period defined by %WT, and then transmit the remaining characters or
until the next %WT. A command may contain more than one %WT.
Type
Remote:
Ethernet Transmit Action
Transmit the selected Ethernet Action command. If command contains
WAIT (%WT), then transmit all characters prior to %WT, wait for the time
period defined by %WT, and then transmit the remaining characters or
until the next %WT. A command may contain more than one %WT.
SNMP Transmit Action (Only available for Connection Type “SNMP”)
Transmit the selected SNMP Action. WAIT is not supported. The SNMP
Action entry must contain a “Community” entry and OID entry.
GTP-32/ DC20 (Only available for Device Type “GTP-32/DC20”)
Transmit Key Press or Key Release message using Event In Key number.
O
F
F
A
C
T
I
O
N
Action
Label
GPO Number
Serial Transmit Action
Ethernet Transmit Action
SNMP Transmit Action (Only available for Remote Device Connection Type “SNMP”)