System configuration web page – DNF Controls AnyWhere Interface Switch User Manual
Page 6

Page 6 of 20
3. SYSTEM CONFIGURATION Web Page
Software Upgrade: Use this link to install the P1 upgrade file provided by DNF Controls
Web Upgrade: Use this link to install the Web pages’ upgrade file provided by DNF Controls
Save Configuration
to PC:
Use this link to save the AIS’s current configuration to a configuration file on a
computer. The web browser will prompt for file name and directory. The file
extension must be ‘dnf’.
Restore Configuration
from PC:
Use this link to download a configuration file from your computer into the AIS.
The web browser will prompt for directory and configuration file name. The file
extension must be ‘dnf’.
Set Configuration
to Defaults:
Use this link to reset all AIS configurations to factory defaults. This will NOT
change the IP address, subnet mask or gateway address. The AIS will reboot
automatically.
Enter Label: Enter 32 character label which is only displayed on the Home Page to identify
the AIS.
Enter the new IP
settings below:
Enter the new IP address, Gateway, and Subnet Mask. Click on Save Config
to save the new entries. The AIS will reboot automatically.