DNF Controls AnyWhere Interface Switch - Manual (Page 14)

Page 14 of 20
8. TALLY Configuration Web Page
Fixed Key legend and color are static
Follow Switch The key legend and color defined for the current Step will be
displayed on the face of the switch
Follow Local
GPO
The key legend and color assigned for OFF will be displayed
when the indicated GPO is OFF. The key legend and color
assigned for ON will be displayed with then GPO is ON.
Follow USP The key legend and color follow the assigned USP GPI or GPO.
The key legend and color assigned for OFF will be displayed
when the assigned GPI or GPO is OFF. The key legend and
color assigned for ON will be displayed with the assigned GPI or
GPO is ON.
Follow GTP/DC The key legend and color follow the assigned GTP-32, DC20, or
DC21 event label.
The key legend and color assigned for OFF will be displayed
when the assigned Event Label is OFF. The key legend and
color assigned for ON will be displayed with the assigned Event
Label is ON. (See Event Notification Table on GTP or DC. )
Tally Mode
EXT Tally
Commands
A Remote Device will control the key legend and color using the
DNF’s EXT Tally protocol. (On the Remote Device List web
page, set Device Type for this Remote Device to “EXT Tally”.)
See “EXT Tally Commands” section for command format.