DNF Controls AnyWhere Interface Switch - Manual (Page 19)

Page 19 of 20
TEXT
A maximum of 18 characters may be displayed on the switch face, 3 rows of 6 characters, using
SMALL font size. Any number of characters less than 18 may be displayed.
A maximum of 8 characters may be displayed on the switch face, 2 rows of 4 characters, using
NORMAL font size. Any number of characters less than 8 may be displayed.
A maximum of 3 characters may be displayed on the switch face, 1 row of 3 characters, using BIG
font size. Any number of characters less than 3 may be displayed.
Font Size:
0 = Small font- 6 characters x 3 rows
1 = Normal font- 4 characters x 2 rows
2= Big Font- 3 characters x 1 row
Example #3: Set switch #2 font size to Normal, 2 rows of 4 characters, and display
“Test1234” on the face of the switch.
Command is [ #T=21Test1234]
Example #4: Set switch #1 font size to Big, 1 row of 3 characters, and display “BIG” on the
face of the switch.
Command is [ #T=12BIG]
Example #5: Set switch #4 font size to Small, 3 rows of 6 characters, and display
“abcdefghijklmnopqr” on the face of the switch.
Command is [ #T=40abcdefghijklmnopqr]
Example #6: Set switch #3 font size to Small, 3 rows of 6 characters, and display “TEST”
on the face of the switch.
Command is [ #T=30TEST]
Example #7: Set switch #1 font size to Small, 3 rows of 6 characters, and display “TEST”
on the second row. Add 6 spaces after the font size to force TEST to the second row.
Command is [ #T=10 TEST]