DNF Controls 4000CL-TO - Manual (Page 5)

5 4000CL-TO, 400 Clip Fast Access System, PinnacleThunder Protocoll
Getting Started . . .
2. SYSTEM DESCRIPTION
The 400 Clip FAST Access System consists of the ST300-SSM VTR Controller and Shotlist
Software. The Video Server must support Odetics Broadcast Protocol. The ST300 controls up to
4 video channels individually or ganged.
SHOTLIST provides fast access to existing video clips stored on Pinnacle Thunder Video Servers
supporting Odetics Broadcast Protocol. The SHOTLIST contains up to 400 CLIP IDs, stored in
non-volatile memory in the ST300.
Remotely view the CLIP IDs that exist in the Pinnacle Thunder under control.
Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit
number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE] to
recue to the beginning of the clip or to the “recalled” time if defined.
DEFINITIONS
Throughout this document the Pinnacle Thunder will be referred to as “Video Server.”
The ST300-S/SM is referred to as “ST300.”
Words surrounded by brackets, for example, [ENTER], are keys on the ST300.
[XXX] + [XXX] means hold the two keys down simultaneously.