DNF Controls 4000CL-TO - Manual (Page 11)

11 4000CL-TO, 400 Clip Fast Access System, PinnacleThunder Protocoll
Advanced Features . . .
14. CREATE NEW CLIPS
a. Press
[CLIP LIST]. The CLIP LIST indicator will turn on.
The display will show “CREATE NEW CLIP.”
b. Press
[LOAD]. The display will show the default CLIP ID.
c. Press
[LOAD] to accept the default CLIP ID.
OR
Use the [NEXT CUE], [LAST CUE] keys and Wheel to edit the CLIP ID.
Use the [NEXT CUE] and [LAST CUE] keys to position the cursor.
Turn the Wheel to select the desired letter.
OR
Create an ID using the numeric keypad, with a maximum of eight characters.
Press [ENTER].
d. Press
[LOAD] to create the selected CLIP ID.
e.
If the selected CLIP ID already exists, a warning message will be displayed. To load the
existing clip, press [ENTER]. Press [ESC] to exit without loading the existing clip.
15. CAPTURE FUNCTION
The CAPTURE function allows source material from a VTR to be quickly recorded into the Video
Server. A CLIP ID is also created.
VTR1 is always the Recorder (the Video Server).
Select VTR [2], [3] or [4] as the source VTR. Any RS422, SONY protocol compatible VTR can
be used.
Use the transport function keys on the ST300 to control the source VTR. Each source VTR needs
its own set of IN and OUT points.
a. SET AN IN (OUT) POINT
1) Press
[IN] ([OUT]) to set the IN (OUT) Point.
The IN (OUT) indicator will turn on.
OR
Press [SHIFT] + [IN] ([OUT]) to manually enter a new IN time.
2)
Press [ENTER] to save the entered time.
OR
Press [ESC] to exit without saving.