beautypg.com

E. execute capture function – DNF Controls 4000CL-TO User Manual

Page 13

background image

13

4000CL-TO, 400 Clip Fast Access System, PinnacleThunder Protocoll

e. EXECUTE

CAPTURE

FUNCTION


1)

Press VTR [2], [3] or [4] key to select the source VTR.


2) Press

[SHIFT] + [RECORD].


3)

The display will prompt you for a CLIP ID. A default CLIP ID will be shown.


4) Press

[LOAD] to accept the default CLIP ID.

OR

Use [NEXT CUE], or [LAST CUE] and Wheel to edit the CLIP ID.


5)

Use the [NEXT CUE] and [LAST CUE] keys to position the cursor.
Turn the Wheel to select the desired letter.
OR

Create an ID using the numeric keypad, with a maximum of eight characters.
Press [ENTER].


6) Press

[LOAD] to accept the CLIP ID.

The ST300 will create the new CLIP ID on the Video Server.

The Source VTR will preroll to the IN Point, then play.
At the Source VTR’s IN point, the RECORDER will go into record.

At the Source VTR’s OUT point, the RECORDER will terminate record, post-
roll for 2 seconds, then stop.

The Source VTR will search to the OUT point and stop.

The Source VTR’s current time will be marked into the IN point.
The OUT point will be cleared.

The IN indicator will stay on. The OUT indicator will turn off.