DNF Controls 2034CL-SX - Manual (Page 19)

19 2034CL-SX, 300 Clip Instant Access System, Sony SX Protocol
i. EXECUTE CAPTURE FUNCTION
1) Press [SHIFT] + [RECORD].
The display will prompt you for a CLIP ID.
2) Enter the new CLIP ID using the numeric keypad on the ST300 or on the
“qwerty” keypad on the ST420.
3)
Press [LOAD] to start capturing.
OR
Press [ENTER] to start capturing.
The ST300 will create the new CLIP ID on the DDR.
The Source VTR will preroll to the IN Point, then play.
At the Source VTR’s IN point, the RECORDER will go into record.
At the Source VTR;s OUT point, the RECORDER will terminate record, post-roll for 2
seconds, then stop.
The Source VTR will search to the OUT point and stop.
The OUT point will be cleared.
The IN key indicator will stay on. The OUT key indicator will turn off.