DNF Controls 2034CL-SX - Manual (Page 18)

18 2034CL-SX, 300 Clip Instant Access System, Sony SX Protocol
c. VIEW THE IN POINT
1) When the [IN] key indicator is on, press the [IN] key to view the existing IN
Point.
2) While viewing the IN Point:
Press [MARK] to overwrite the saved time with the current time.
Press [SHIFT] + [IN] to manually enter a new IN time.
Press [RECUE] to search to the IN point.
Press [DEL] + [IN] to clear the IN point. The IN key indicator will
turn off.
d. VIEW THE OUT POINT
1) When the OUT key indicator is on, press the [OUT] key to view the existing
OUT Point.
2) While viewing the OUT Point:
Press [MARK] to overwrite the saved time with the current time.
Press [SHIFT] + [OUT] to manually enter a new OUT time.
Press [RECUE] to search to the OUT point.
Press [DEL] + [OUT] to clear the OUT point.
(The OUT indicator will turn off.)
e. CLEAR THE IN POINT
1) Press and hold the [DEL] key.
2) Press and release the [IN] key. The IN key indicator will turn off.
f. CLEAR THE OUT POINT
1) Press and hold the [DEL] key.
2)
Press and release the [OUT] key. The OUT key indicator will turn off.
g. ENTER PREROLL VALUE
1) Press the [MENU] key. The MENU key indicator will turn on.
2) Turn the wheel until “Enter PREROLL:” is shown on the display.
3) Enter the desired preroll value using the ST300’s numeric keypad.
4) Press [ENTER] to save the entered value.
OR
Press [ESC] to exit without saving.
h. SET THE RECORD DELAY
See SETUP MENU Section for details.