DNF Controls 2034CL-SX - Manual (Page 10)

10 2034CL-SX, 300 Clip Instant Access System, Sony SX Protocol
ST300
SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY
The version number for the currently installed software is displayed.
SOFTWARE
VERSION
SET
Sets the operation mode of the DNW. See VIDEO SERVER SETUP Section for more
OPERATION details.
MODE
RECORD
Press Softkey to select single button or 2-button record.
RECORD = [REC] Only OR [REC] + [PLAY].
PREROLL
Enter preroll value (Default =5sec).
RECORD
Enter up to 99 Frames. Default = 19 frames.
DELAY
TRANSMIT
Transmit cuelist to another ST300 or to a PC.
CUELIST
RECEIVE
Receive cuelist from another ST300 or PC.
CUELIST
ST300 SETUP
Clear Cues SetDefault