Console layout (continued) – Diamondback Fitness 1000Sr User Manual

Page 17

Console Layout (Continued)

Press the

USER ZONE key.

The message

“SELECT FUNCTION” will be fl ashed in the message display then the message

“USER SETUP” will come up next. Press the ENTER key when the User Setup message is in
the message display.
The message

“USER 1” will come up. Press the ENTER key.

Note: If a user was created already the user’s name will come up instead. Use the UP or
DOWN keys to fi nd an open space.
The message

“CREATE NEW USER” will then be displayed. Press the ENTER key.

Note: If there has been a user already created there will be four function that you can select from
using the UP or DOWN keys.
When the message

“DELETE USER = YES” comes on, press the ENTER key. By pressing

the enter key you will deleted the information that was saved under the name you selected. If
by mistake you selected a profi le that you don’t want to delete press the UP or DOWN keys to
change the yes to no and press enter.
Enter your name, using up to eight characters. Use the

UP or DOWN keys to toggle trough the

alphabet on each space. On each space once you fi nd the letter you need press the ENTER
key. If your name is less than eight characters long just press the ENTER key on the rest of the
spaces to leave them blank.
Enter your age. The message display will display

“AGE = XX” press the UP or DOWN keys to

change the number to your age.
Enter your weight. The message display will display

“WEIGHT = XX” press the UP or DOWN

keys to change the number to your weight.
Enter your Warm Up and Cold Down time. The message display will display

“WU/CD = 3 MIN”

press the UP or DOWN keys to change the number from 1 to 5 minutes.
Enter your Target HR. The message display will display

10.

“TARGET HR = XX PCT” press the UP

or DOWN keys to change the number FROM 60% to 85%.
The message

11.

“SET UP COMPLETED” will be displayed. The console will reset to idle mode

and all of the information entered will be saved.

Edit Profi le

Once a profi le is saved any of the information can be edited.

Press the

USER ZONE key.

Press the

ENTER key when the “USER SETUP” message comes on in the message display.

Using either the

UP or DOWN keys fi nd your profi le and press the ENTER key.

Press either the

UP or DOWN keys until the message “EDIT USER” comes up.

Press the

ENTER key.

At this time the console will allow you to edit your age, weight, warm up and Cool Down time and

target HR. The data can be changed the same way it was done when creating the user profi le
the fi rst time. The console will prompt you the fi rst data you can edit. If you don’t wish to edit
some of the data, just press the enter key when the data comes up.
After you edit your Target HR the message

“SET UP COMPLETED” will come up, the data you

edited will be saved and the console will reset to Idle mode.

Review Totals

If a user profi le is selected when working out; the console will save and accumulated the workout time,
the distance and the total calories and add it to the data totals for that user then the information can be
reviewed at any time.

1000Sr OM.indd 18

7/7/2008 2:28:07 PM