Chapter 10 – DFI DT122-HR Manual User Manual
Page 67
www.dfi .com
67
Chapter 10 Intel AMT Settings
Chapter 10
3. Enter a new password in the space provided under Intel(R) ME New Password then press
Enter. The password must include:
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and ” characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
4. You will be asked to verify the password. Enter the same new password in the space pro-
vided under Verify Password then press Enter.
5. Select Intel(R) ME General Settings then press Enter.
Intel(R) ME General Settings
Intel(R) AMT Confi guration
Exit
[ESC] = Exit
[ENTER] = Submit
[
MAIN MENU
]
Intel(R) ME New Password
Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Intel(R) ME General Settings
Intel(R) AMT Confi guration
Exit
[ESC] = Exit
[ENTER] = Submit
[
MAIN MENU
]
Verify Password
Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ESC] = Exit
[ENTER] = Access
[
MAIN MENU
]
Intel(R) ME General Settings
Intel(R) AMT Confi guration
Exit
[
] = Select
Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.