Chapter 7 – DFI DT122-HR Manual User Manual
Page 42
www.dfi .com
42
Chapter 7 BIOS Setup
Chapter 7
Anti-Theft Configuration
This section is used to disable the PC at the hardware level in the event of loss or theft.
Intel(R) Anti-Theft Technology
The options are Enabled and Disabled.
Enter AT Suspend Mode
The options are Enabled and Disabled.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Intel(R) Anti-Theft Technology Confi guration
Intel(R) Anti-Theft Technology
Intel(R) Anti-Theft Technology Rec
Enter Intel(R) AT Suspend Mode
Advanced
[Disabled]
3
[Disabled]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable AT in
BIOS for testing only.
AMT Configuration
This section configures the parameters of Active Management Technology.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Intel AMT
Un-Confi gure ME
Advanced
[Enabled]
[Disabled]
Enable/Disable Intel(R)
Active Management Tech-
nology BIOS Extension.
Note: iAMT H/W is
always enabled.
This option just controls
the BIOS extension execu-
tion. If enabled, this re-
quires additional fi rmware
in the SPI device.
Intel AMT
Enables or disables the AMT function.
Un-Configure ME
Selects Enabled to un-configure the ME function without a password.
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit