DFI DT122-HR Manual - Manual (Page 15)

www.dfi .com
15
Chapter 3 Installing Devices
Chapter 3
Installing the PCI or PCIe x16 Expansion Card
Important:
When inserting the riser card,
please select a card within
175mm (as shown on the next
picture).
1. The PCIe x16 on the motherboard is used to insert a TS200-1P or TS200-1E riser card.
To install the expansion card, you need to remove the mounting bracket and the mounting
screw that secure the bracket to the chassis and then remove the bracket. Put the screw and
the brackets in a safe place for later use.
Mounting bracket
Mounting screw
Bracket
PCIe x16 slot
Mounting bracket and
mounting screw
PCI slot
T200-1P
T200-1E