DFI DT122-HR Manual - Manual (Page 66)

www.dfi .com
66
Chapter 10 Intel AMT Settings
Chapter 10
4. In the Save & Exit menu, select Save Changes and Reset then select OK. Enable Intel ® AMT in the Intel ® Management Engine BIOS
Extension (MEBX) Screen
1. When the system reboots, the following message will be displayed. Press as
soon as the message is displayed; as this message will be displayed for only a few sec-
onds.
2. You will be prompted for a password. The default password is “admin”. Enter the default
password in the space provided under Intel(R) ME Password then press Enter.
Restore/Load Default
values for all the setup
options.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from fi le system device
Chipset Advanced Main Boot Security Save & Exit
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Intel(R) Management Engine BIOS Extension V7.0.0.0053
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Intel(R) ME Firmware version 7.0.4.1197
Press
to enter Intel(R) ME Setup
Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ESC] = Exit [ENTER] = Submit
[ MAIN MENU ]
Intel(R) ME Password
Intel(R) ME General Settings 
Intel(R) AMT Confi guration 
Exit