DFI DT122-HR Manual - Manual (Page 31)

www.dfi .com
31
Chapter 5 Ports and Connectors
Chapter 5
Standby Power LED
This LED will lit red when the system is in the standby mode. It indicates that there is power
on the system board. Power-off the PC and then unplug the power cord prior to installing any
devices. Failure to do so will cause severe damage to the motherboard and components.
Standby
Power LED
CompactFlash Socket
CompactFlash
socket
The CompactFlash TM socket is used for inserting a CompactFlash TM card. CompactFlash TM card is
a small removable mass storage device designed with flash technology - a non-volatile storage
solution that does not require a battery to retain data indefinitely. The CompactFlash TM technol-
ogy is widely used in products such as portable and desktop computers, digital cameras, hand-
held data collection scanners, PDAs, Pocket PCs, handy terminals and personal communicators.