Chapter 3 - installing devices, Chapter 3 chapter 3 - installing devices – DFI DT122-HR Manual User Manual
Page 11
www.dfi .com
11
Chapter 3 Installing Devices
Chapter 3
Chapter 3 - Installing Devices
1. Make sure the system and all other peripheral devices connected to it has been powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the sides of the system are used to secure the cover to the chassis.
Remove these screws and then put them in a safe place for later use.
Mounting
screw
Mounting
screw
4. After removing the mounting screws, slide the cover backwards.
Slide the Cover Backward
5. The DIMM sockets and SATA drive bay are readily accessible after removing the chassis cover.
SODIMM socket
2.5"/3.5" SATA
drive bay