Dataprobe iBootBar - Manual (Page 22)

Page 22
iBootBar V1.5x
Command Description Admin Fact Def
set syslog server Set the IP address of the syslog server. Yes
Autoping Commands
Command Description Admin Fact Def
get autoping <1‐16> Returns the settings and state of the selected autoping. Yes
set autoping <1‐16> ipaddress Set the IP address of the selected auto ping in dotted decimal. Yes 0.0.0.0
set autoping <1‐16> action Set the action of the selected auto ping. On-Follow, On-Latch, Off-
Follow, Off-Latch, Cycle, Cycle-Once, or None. Yes None
set autoping <1‐16> frequency <1‐999> Set the frequency of the selected autoping in seconds Yes 10
set autoping <1‐16> count <1‐99> Set the number of failures the select autoping requires before it
triggers its action. Yes 3
set autoping <1‐16> device
outlet <1‐8>
Assign an AutoPing to either a device/outlet or group. Each
AutoPing can be assigned to one or the other Yes
set autoping <1‐16> group Yes
Event Commands
Command Description Admin Fact Def
get events Returns a list of all pending events Yes
get event Returns the details of the selected event Yes
add event Creates a new event. Up to 16 events can be created.
The default time and date will be the time and date that the event is Yes