Dataprobe iBootBar - Manual (Page 21)

iBootBar V1.5x
Page 21
Web Server Commands
Command Description Admin Fact Def
get web Returns the root iBootBar’s current web server settings Yes
set web enable Enable or disable the root iBootBar’s web server Yes Yes
set web port <1‐65535>
Set the root iBootBar’s web server’s port. Web standard port is 80.
If changed, access the iBootBar using
http://xxx.xxx.xxx.xxx:
Dataprobe recommends changing the web port on all iBootBars that
are accessible from the internet. Yes 80
set web ssl Enable or disable the root iBootBars web server’s SSL capabilities. Yes No
Telnet Commands
Command Description Admin Fact Def
get telnet Returns the current settings of the root iBootBar’s telnet server. Yes
set telnet enable Enable or disable the root iBootBar’s telnet server Yes Yes
set telnet port <1‐65535>
Set the port of the root iBootBar’s telnet server.
Dataprobe recommends changing the telnet port on all iBootBars
that are accessible from the internet.
Yes 23
Syslog Commands
Command Description Admin Fact Def
get syslog Returns the current settings of the syslog setup Yes
set syslog usesyslog Enable or disable the syslog reporting agent Yes No