beautypg.com

Dataprobe iBootBar User Manual

Page 16

background image




Page 16

iBootBar V1.5x


Command Line Interface

The Command Line Interface provides complete setup of all function of the iBootBar. Access the CLI either via the network interface using Telnet, or via the
modem or serial port using a terminal emulation program. Some commands of the CLI require administrative rights. These are indicated in the table below.

Outlet Commands

Command

 

Description Admin

Fact

Def

get outlets 

Returns the status of ALL the outlets the user has rights to.
Displays all devices and outlets in a cluster configuration.

No

get outlet <1‐8> 

Returns the status of the iBootBar. This command is for iBootBars
not used in a cluster configuration. If used in a cluster, it is the
same as device #1. The user must have rights to the selected
outlet.

No

set outlet <1‐8>  

Sets the selected outlet to the selected state. The user must have
rights to the selected outlet. This command is for iBootBars not
used in a cluster configuration. If used in a cluster, it is the same
as device #1

No

get device <#1‐#16/devname> outlet <1‐8> 

Returns the status of the select outlet on the selected iBootBar.
Device is either the number of the device <#1 to #16> or the name
of the device, as set. Number sign (#) required. The user must
have rights to the selected outlet.

No

set device <#1‐#16/devname> outlet <1‐8>  

Sets the selected outlet on the selected iBootBar to the selected
state. The user must have rights to the selected outlet.

No

set device <#1‐#16/devname> outlet <1‐8> name  

Sets the name of the selected outlet of the selected iBootBar. 20
characters max.

Yes Outlet

<#>

get device <#1‐#16/devname> outlet <1‐8> initial.state 

Get or set the initial state of the selected outlet of the currently
selected iBootBar. Initial state is the condition of the outlet when
the iBootBar is powered up.

Yes Last

set device <#1‐#16/devname> outlet <1‐8> initial.state 
 

This manual is related to the following products: