Dataprobe iBootBar - Manual (Page 14)

Page 14
iBootBar V1.5x
Status The Status window displays the current view, controllable outlets, or other current information. Buttons in the
Header select the current view.
Device View
The Device View displays the status of a single
device. It shows the current status of each outlet
of the device, and allows selection of one or more
outlets for control. It also displays the current
draw of each inlet and any alarms.
Use the checkboxes to select or de-select any
outlet for control.
Outlet Status Outlet status is displayed by a
colored text box. The color indicates the current
status of the outlet and the text indicates the
function being performed.
Inlet Status The current of each power inlet
(main) is displayed below the outlets fed by that
inlet. High current alarms are highlighted in red,
low current alarms are highlighted in yellow.
Group View
The Group Veiw displays the status of a single
group. Groups are two or more outlets linked
together for simultaneous control. In the group
view, each device containing a member of the
group is displayed on a line, with the status of the
outlets that are group members. Control the
group by clicking on the appropriate button in the
Control section.
Global View
The Global View displays all iBootBars in one
view. Each outlet has a checkbox, allowing
multiple outlets to be simultaneously controlled
without the need to establish a group. Only outlets
that the user has rights to will have status and
control checkbox displayed.
On Outlet is On
Cycle Outlet is On during Cycle. It will turn off
when cycle time is complete
Off Outlet is Off
Reboot Outlet is Off during Cycle. It will turn on
when cycle time is complete
On / Pend Outlet is Off. It has been commanded to
turn on and will do so in its turn based on
the delay time.
Device View
Group View
Global View