Daktronics CARS - Manual (Page 59)

To enter the setup mode on the WYSE30 terminal, plug in a WYSE keyboard and while holding
down the key, type . A line of boxes should appear on the top and bottom of the
screen. The setup information is located in the bottom row of boxes. To move around in the setup
levels, use the cursor keys. To switch choices for a particular item, use the space bar. When
completed, type one more time.
A) First Setup Level: HANDSHAKE = DTR
SCREEN = DARK
CURSOR = BLOCK
BLINK = ON
MODE = FDX
B) Second Setup Level: DATA BITS = 8
STOP BITS = 1
PARITY = NONE
C) Third Setup Level: BAUD RATE = 9600
KEYS = US
D) Fourth Setup Level: BLK END = US/CR
AUTO NL = OFF
CR = CR
AUTOSCRL = OFF
LOCK = CAPS
REPEAT = ON
E) Fifth Setup Level: CRT SAVER = OFF
PROTECT = DIM
ATTRIBUTE = PAGE
F) Sixth Level Setup COMPATIBLE MODE = WY30
ENHANCE = OFF
KEYPAD = NUMERIC
FREYS = REMOTE
TEST = OFF
Appendix C: Announcer’s Monitor C-5